Charger CFB12/24-12 for batteries Pb, AGM and LiFePO4

Smart, fully automatic charger designed for Lead-acid, AGM and LiFePO4 batteries, enabling a permanent connection with the battery being charged, with capacity from 6 Ah to 200 Ah. It is equipped with a program for the regeneration of Lead-acid batteries. The charger uses 7-step charging and handles both 12V and 24V batteries.

Key Features

• Input voltage: 100-240VAC, 50-60Hz
• Rated voltage/current: 12V 12A / 24V 6A
• Minimum starting voltage: 7.0V
• Charged batteries: Pb 12 or 24V, LiFePO4 3S-8S, Li-Ion 2S-7S
• Battery capacity range: 6Ah – 200Ah
• Protection against polarity reversal, short circuit, overheating
• Surge protection
• Built-in fan
• Thermal protection: 65° C +/- 5° C
• Complies with standards: CB, CE, IEC60335, EN61000, EN55014
• Efficiency: App. 85%.

Instructions for use

1. Connect the charger to the mains voltage and select the required charging mode with the MODE button (AGM, CAR, MOTO, LiFePO4, REPAIR) Preset AGM, the last set data remains in the device's memory even after it is disconnected from the network.
2. Turn off the device from the mains and connect the charged battery to the supply terminals. Step 1 is not required if the same type of battery is repeatedly charged.
3. Plug the charger into the mains. The charger will start charging automatically. The circular indicator shows the charging cycle phases, terminal voltage, charging current, ambient temperature and charge level.
4. After reaching the desired terminal voltage (for AGM 14.4V), the charger switches to float mode with maintenance voltage (for AGM 13.5V)